Bednar

Swifter SN

A mounted seedbed cultivator suitable for traditional soil cultivation before seeding.
Download the Brochure
Download

Attributes

Working Width
3 to 5 (m)

Details

A MOUNTED SEEDBED CULTIVATOR SUITABLE FOR SMALLER FARMERS

The low towing demands make the SWIFTER SN mounted seedbed cultivator suitable for aggregation with lower power tractors, which are often used by smaller farmers. The working width of these cultivators ranges from 3 to 5 metres. The effective combination of working parts provides intense levelling, mixing, clod crumbling and final field surface levelling. In one pass, you can prepare the perfect seedbed and thus achieve savings in the total costs.

 

 

 

UP TO 7 OPERATIONS IN ONE PASS

Creating a seedbed for proper and even crop emergence.

Combining several operations into one means fewer passes through the field and lower costs of soil preparation. The front levelling bar perfectly levels any unevenness. The front roller crumbles the clods. The main working section undercuts, aerates and warms up the soil layer. The final clod crumbling is provided by various types of rollers in combination with other equipment behind the rollers.

 

 

 

Maintenance-Free axle bearings

 

SWIFTERDISC bearings are completely maintenance free, and they have been tested in the most demanding conditions, including extremely rocky soils.
The bearings are attached to the disc with six bolts.
Oversized design guarantees trouble-free operation, even after thousands of hectares worked

 

 

Compressing Spring

Most seedbed cultivators equipped with crosskill rollers  incur slackness between the individual crosskill segments after working for some number of hectares.  We use  a compressing spring in SWIFTER cultivators, mounted on the shaft where the crosskill rollers are as well.  The spring  continuously presses on the crosskill segments and eliminates  slackness between the individual segments.

 

 

 

 

Newsletter

Subscribe to our newsletter

Website designed and built by mtc.