New 145hp six-cylinder Case IH Maxxum 150 makes working debut05 NOV
A new compactly-designed six-cylinder 150hp tractor equipped with a continuously-variable transmission will be available to Case IH customers from October 2018, with the launch of the new six-cylinder 145hp Maxxum 150 CVX, to be offered alongside the established four-cylinder 145hp Maxxum CVX and smaller Maxxum models.
Until now, the Maxxum range has been based around four-cylinder models only, with four variants focusing on demand for compact, light, universal tractors in this sector. However, recognising some customers’ preference for a six-cylinder machine at the upper end of this power bracket, there is now an alternative to the four-cylinder 145hp Maxxum 145. In place of this tractor’s 4.5-litre four-cylinder FPT engine, the new Maxxum 150 features a 6.7-litre power unit from the same Case IH sister company. As with other Maxxum models, the Maxxum 150 is available with the ActiveDrive 4 four-step semi-powershift, ActiveDrive 8 eight-step semi-powershift (from early 2019) or CVXDrive CVT.
The Maxxum 150 has the same 175hp maximum power rating with Engine Power Management as the Maxxum 145. Its torque rating, though, is greater, at 740Nm (measured at 1,500rpm) compared to the 700Nm of the Maxxum 145. Like the engine in four-cylinder Maxxum tractors, the six-cylinder power unit in the Maxxum 150 meets Stage IV emissions regulations using patented Hi-eSCR selective catalytic reduction, a maintenance-free system with no exhaust gas recirculation.
Despite its different engine configuration, the Maxxum 150 retains the same 2,642mm wheelbase and 5,137mm length as four-cylinder Maxxum models, another feature likely to appeal to farmers seeking compactness, manoeuvrability and minimal soil disturbance when manoeuvring and turning at headlands. The Maxxum 150 is also the lightest, smallest tractor of its configuration and power output, and with an unladen weight of 5,020kg weighs just 130kg more than the Maxxum 145.
With the ability to work at a set engine or forward speed and alter either one independently of the other, tractors with continuously-variable transmissions are particularly well-suited to operating equipment where this is advantageous, meaning consistent work can be maintained regardless of soil type or the field topography. Where the Case IH CVXDrive transmission for the Maxxum range is different is in its use of double clutch technology. This means that at the point it takes place, the change between the transmission’s two mechanical ranges is seamless, with uninterrupted power flow from standstill to the tractor’s 50km/h top speed, and full tractive power available across the whole speed range, critical when operating destoners or planters on undulating land or that which, for example, consists of differing soil types.
Maxxum CVXDrive tractors are also equipped Automatic Productivity Management (APM), another feature with particular benefits when operating across varying land. By automatically reducing engine speed when it detects when less power is required – for example, on an area of lighter soil, or when demands on an implement’s hydraulic circuit are reduced – it is able to significantly cut fuel consumption and operating costs.
Options to ensure pass-to-pass accuracy at work and on the headland
Like other tractors in the Maxxum range, the Maxxum 150 is available equipped from the factory with the necessary hardware for the installation of AFS AccuGuide automated steering, to ensure the creation of parallel passes. Operated through the Case IH AFS Pro 700 terminal screen, the system can work with a number of different signals, according to the level of pass-to-pass accuracy required, right down to RTK, with its 2.5cm repeatability for absolute minimum wastage of fuel and crop inputs.
When specifying new AccuTurn Pro, the operations of AFS AccuTurn automatic end of row turn and the HMC II automated headland management system are combined to completely automate the headland turn process. The system guides the tractor automatically into the next chosen pass to ease the operator workload and further increase accuracy by ensuring it is placed exactly where it needs to be at the start of the next run.
AgriScot 201822 OCT
On Wednesday 21st November we'll be exhibiting at AgriScot at Ingliston, Edinburgh. AgriScot is now widely regarded as one of the premier events in UK agriculture. If you're coming along make sure to come and see us at our stand in the Machinery hall. Click here to pre-register for free to fast track your entry on the day.
WM ROSE OPEN DAYS - JULY 201804 JUN
This Summer Wm Rose & Sons will be hosting an open day at both depots – Lamancha (Tues 10th July) and East Linton (Thurs 12th July)
Come along between 1pm - 7pm to see the latest machinery models from Manitou, Case IH, Gehl, Horsch and Polaris up close; watch demonstrations; hear from the experts and all while enjoying some refreshments.
A list of machines on show will be posted nearer the event.
If you are planning on coming along please let us know via email or by calling our depots or sales reps.
Here at WM Rose & Sons Ltd we take your privacy seriously30 APR
We will only use your personal information to administer your account and to provide the products and services you have requested from us. However from time to time we'd like to contact you with offers and events which may be of interest (including our upcoming Open Days this Summer, details to be revealed soon!) Please let us know all the ways you would like to hear from us by clicking here.
ScotPlant 201816 APR
Scotplant is Scotland’s largest construction equipment trade show.
Wm Rose & Sons Ltd are excited to be exhibiting once again at the 2-day event at the Royal Highland Centre near Edinburgh. You can find us on Friday 20th & Saturday 21st April on Stand No 2, 10th Avenue. We'll be exhibiting a whole variety of equipment suited to the construction industry from Manitou, Case IH, Polaris, Multisweep and more!
And the best part, it’s free for you to attend.
If you’d like to attend you can register for your pass here. Children under the age of 16 do not need to register.
Multiple attendees from the same company may be registered using the same email address, however, the full name of each attendee must be given.
Case IH Launches New Mid-Size & Smaller Sizes at LAMMA 201829 JAN
For the first time in the UK, Case IH used LAMMA 2018 to present its new Maxxum ActiveDrive tractor which has just been awarded Machine of the Year, as well as the new Farmall A model and updated Farmall C tractors.
NEW MAXXUM ACTIVEDRIVE
Case IH Maxxum Multicontroller tractors can now be specified with ActiveDrive 8, a new 24 x 24 semi-powershift transmission which provides eight powershift steps in each of three ranges.
Incorporating features which make the tractor more efficient and more relaxing to drive, ActiveDrive 8 joins the existing four-speed 16 x 16 40 km/h semi-powershift and continuously-variable 50 km/h CVX transmission options which have been renamed ActiveDrive 4 and CVXDrive.
Range One of ActiveDrive 8, which covers speeds up to 10.2 km/h and is designed for heavier draft work and applications requiring very low speeds, is also available with additional creep speeds. Range Two, covers nearly 90% of field, grassland and loader requirements from 1.6-18.1 km/h. For road travel, the transmission is designed to start in Range Three, and a skip-shift function allows quick progress through the powershift speeds. An auto shift feature allows the tractor to progress automatically through any set of eight speeds in the field, and through all 16 gears in the top two ranges on the road.
Because the clutch pedal is not required to change gear, this transmission is suited to power-hungry tasks where maintaining momentum is critical, such as cultivations or operating large mowers. A true power shuttle, it ensures no loss of drive or traction during changes of direction on slopes and incorporates a ‘brake to clutch’ feature.
Maxxum Multicontroller models make both tractor and operator more productive, courtesy of the unique Case IH Multicontroller armrest and joystick, which put multiple operating functions at the driver’s fingertips. From full transmission operation via thumb-operated powershift and powershuttle control, to engine speed control and the operation of electronic remote valves, everything is immediately to hand. These tractors can also be specified with mechanical or electronic remote valves.
The Maxxum range now includes a new range-topping 175hp (max) six-cylinder Maxxum 150 CVX. Both six-cylinder Maxxum 150 Multicontroller and Maxxum 150 CVX will be fully available from the third quarter of 2018. With this model Case IH now offers the lightest, smallest tractor in the industry with a six-cylinder engine of this power output. Maxxum tractors are powered by FPT Industrial’s 4.5-litre four-cylinder and 6.7-litre six-cylinder turbocharged and intercooled engines, which meet Stage IV emissions regulations using the Hi-eSCR selective catalytic reduction system.
NEW FARMALL A
Case IH three new multi-task tractors, the 55hp Farmall 55A, 65hp Farmall 65A and 75hp Farmall 75, are light, highly manoeuvrable, easy to use, with low running costs. Their design, specification, performance and practicality make them ideal for loader, livestock and municipal applications, as well as for other land-based businesses requiring a low-cost, versatile, easily maintained tractor for general tasks.
Attractively-styled, with a sloping bonnet for excellent forward visibility, all are available in two-wheel-drive or four-wheel-drive form, with a spacious, comfortable CAB or ROPS, and options which enable customers to tailor the specification to their exact requirements.
Power is supplied by 2.9-litre turbocharged/intercooled engines developed by FPT which achieve maximum power from 1900rpm to 2300rpm, providing a 400rpm Constant Power band, with peak torque produced at 1400rpm.
All engines incorporate a maintenance-free Diesel Oxidation Catalyst (DOC) to help meet Stage IIIB emission standards without Diesel Emission Fluid (AdBlue), while the class-leading 600-hour oil change interval minimises servicing costs. A choice of vertical or horizontal exhausts is offered.
The standard transmission on two-wheel-drive models is a 30 kph 12 x 12 Mech-Shuttle, while four-wheel-drive models are equipped with a 40 kph 12 x 12 Mech-Shuttle. The optional 40 kph 20 x 20 Creeper transmission provides a minimum forward speed of just 110m/h, while the optional Powershuttle offers clutch-less operation, ideal for tasks which require frequent changes of direction.
All models feature a Case IH front axle which is three-point linkage and loader-ready, enabling these to be fitted quickly and easily. The rear axle, which has a maximum capacity of 3700kg, incorporates a mechanically-engaged differential lock and oil-immersed disc brakes. The standard hydraulic trailer braking system provides excellent performance, but a pneumatic system can be specified.
The rear three-point linkage sets a benchmark for this class of tractor, providing a maximum lift capacity of 3000kg when an assister ram is fitted. Farmall A models also feature a fully-independent 540rpm, six-spline PTO, with the option of 540/540E and 540/540E plus ground speed units.
Providing outstanding all-round visibility through a class-leading 5m2 glass area, the four-post, flat-floor cab offers a quiet, comfortable, relaxing working environment. Meeting FOPS and Level 2 dust protection standards, it incorporates a high-visibility roof panel, single-piece rear window that opens to almost 90°, front and rear worklights, wide-view mirrors and a rotary beacon. Air conditioning is optional.
UPGRADED FARMALL C
The significantly updated Case IH Farmall C range includes seven compact, versatile models from 58hp to 114hp, all of which incorporate capacity, transmission and control updates to boost comfort and capability.
The significantly updated Case IH Farmall C range includes seven compact, versatile models from 58hp to 114hp, all of which incorporate capacity, transmission and control updates to boost comfort and capability.
Tractors fitted with a front linkage and the top-specification 24/24 hi/lo transmission with electro-hydraulic power-shuttle can now be specified with the Multicontroller joystick/armrest fitted to larger Case IH tractors, giving fingertip control of key functions.
Other improvements include the option of Heavy Duty (HD) axles on models of 86hp and over, a constant speed engine function and true 40kph top speed at just 2,000 engine rpm (300rpm lower than before) to reduce fuel consumption, engine wear and in-cab sound levels without requiring AdBlue.
New Farmall C models also feature 540/540E/1000 rpm PTO options and can be ordered loader-ready, incorporating a subframe, hydraulic connections and joystick, making it easy to install a Case IH LRZ premium or LRA economy loader.
POLARIS 0% Finance Extended until March 201810 JAN
Leading off-road vehicle manufacturer Polaris is offering interest-free finance on new Polaris Sportsman ATVs, Ranger 4x4 Utility Vehicles, RZRs and Scramblers (excluding Youth). The 0% finance scheme, in conjunction with Rural Finance, is available over two years with 2 + 22 monthly payments up to a maximum of 80% of the Recommended Retail Price through to 31st March 2018.
It’s an exciting opportunity to put a Polaris to work for you at a low monthly cost and see a return on your investment. Each new Polaris comes with a two year-warranty and CESAR security as standard for peace of mind. Take the Polaris Ranger Diesel for example and you also get the roof and rear panel included in the price. There is also a wide range of other accessories available for Polaris ATVs and UTVs and the finance offer can also include up to £1,000.00 (excluding VAT) on genuine Polaris accessories.
Polaris 4 x 4 vehicles offer exceptional off-road ability to meet the challenges of the roughest terrain, with one of the widest ranges to choose from so there is a Polaris to suit everyones' needs. Members of the NFU, NFU Scotland and Ulster Farmers Union will additionally benefit from the current 5% discount on selected new Polaris ATVs and utility vehicles. A visit to your nearest Polaris dealer is recommended for full details, any special deals, and to see the extent of the Polaris range and accessories.
The availability of the 0% finance through Rural Finance is subject to status; the offers and warranty are subject to terms and conditions. Available in the UK, excluding the Republic of Ireland. Offers end on 31st March 2018.
For more information on how you can benefit from this offer please contact our head office on 01968 660777 or email firstname.lastname@example.org.
Merry Christmas & Best Wishes for 2018!19 DEC
Thank you to all our customers for their business this year. It has been a pleasure being of service and we look forward to contributing to your success in 2018.
Please note both depots will be closed on the following days over the Christmas period:
Monday 25th & Tuesday 26th December 2017
Monday 1st & Tuesday 2nd January 2018
From everyone at Wm W.M. Rose & Sons Ltd we wish you a prosperous and happy new year!
The Manitou group scoops the "Etoile du Design Made in France" prize!11 DEC
The Manitou group, the global leader in all-terrain handling, has won the "Étoile du Design Made In France" prize at the Étoiles du Design ceremony held at the Pompidou Centre in Paris. Awarded by APCI (Agency for the Promotion of Industrial Creation), this prize recognises the work done by the Design and R&D teams in stylistic,ergonomic and functional terms on the MLT NewAg range of agricultural telehandlers.
After being awarded the famous "LabelObserveur du Design 2018" by APCI last July for its MLT New Ag range of agricultural telehandlers, the Manitou group has now won the "Étoile du Design Made in France",beating more than 160 projects in the industrial sector. The jury, made up of around thirty influential people in the industrial design sector, clearly liked the "predatory"appearance of this range and its tight, keen curves giving these telehandlers a certain power and aggressiveness. Open to companies, designers, schools and authorities, the Observeur du Design identifies innovative creations and showcases French design expertise. Awarded by the Secretary of State alongside the Minister of the Economy and Finances, Benjamin Griveaux, this award highlights the Group's expertise in product design. Supported by an R&D team of more than 240 engineers and technicians, the Manitou group makes a point of combining performance and aesthetics in its creations.
Thierry Lehmann, the original designer of the NewAg range's lines, explains his thought process: "With very little presence in the handling sector before the 2000s, we have sought to make design a pillar of our models. The NewAg range has been designed to improve the lives of users, with clear visibility for enhanced safety, easy cab access thanks to the Easy-Step and optimized ergonomics in the driver's cab with a joystick that reduces musculoskeletal disorders (MSD). We made the decision to have a very dynamic, keen line, conveying efficiency, sturdiness and power to give the range a modern appearance that turns the codes of handling on their head". The Manitou group filed 8 patents while developing this NewAg range. In order to make its expertise known to the public, Manitou Group seized the opportunity of this ceremony to display one of the famous models from the NewAg range in front of the Pompidou Centre.
Key figures of the MLT NewAg range:
- 12 models with heights ranging from 6 to 9 metres for a loading capacity of between 3and 4 tonnes
- 150 people involved full time for 3 years, in R&D and marketing, in design and production
- 800 production documents
- 15,000 prototype parts
- 100,000 hours of work, i.e. 55 years for a single person!
- 120,000 hours of in-house and external testing with the support of 50 clients
Keep a close eye on the condition of your machine this winter with the Case IH Winter check-up campaign!04 DEC
Machine of the Month - November 2017 - Polaris Ranger 57014 NOV
Polaris Ranger 570
The Polaris Ranger 570 is an impressive side-by-side with class-leading towing and payload, redifined cab comfort, all-wheel drive and a 44 horsepower engine. For more details of the Polaris Ranger 570 read below.
With a powerful 44HP ProStart engine the Polaris Ranger 570 leaves the utility side-by-side competition in the dust. It delivers more torque and rear wheel pulling power to get the job done.
With the Polaris true AWD advantage, all four wheels engage automatically when the Ranger 570 needs more forward traction and reverts back to 2WD when it doesn't. When in 2WD, the VersaTrac Mode switch unlocks the rear differential for easier, tighter turns that won't tear up the lawn.
The engine management system (EMS) delivers optimal torque and horsepower, plus smooth throttle at all speeds and reverse. The EMS, paired with the ProStart engine and clutching advantage, also allows for optimal fuel economy.
Now with 20% more towing capacity - 1,500 lbs - and standard 2" reciever, the Ranger 570 allows you to tackle the toughest jobs with confidence. Additionally, a 1,000lbs a payload capacity is highlighted by a rear box was gas-assist dumping operation that can tote up to 500lbs of materials.
The Polaris Ranger 570 has been desgined for all-day riding comfort. With an ideal seat height combined with wide foot clearance for easy entry and exit. Experience updated bench seats engineered for all-day riding comfort and standard tilt steering wheel adjustment.
To ensure a smooth ride the Ranger 570 features a full 9" (22.9cm) of suspension travel up front and 10" (25.4cm) of Independent Rear Suspension travel - an increase of 11% at all four corners.
Loaded with convenience now with a 25% larger glovebox to keep even more items at the ready plus more conviencent driver and passenger cup holder locations.
For other features, benefits and applications of this impressive model click here to view brochure.
Machine of the Month - September 201725 SEP
Manitou Rotating Telehandler MRT3050
One of the latest rotating telehandler's from Mantiou, MRT3050, is our machine of the month.
The MRT 3050 Privilege Plus is an all-terrain rotating telehandler well suited for construction and industrial applications. This 3-in-1 unit combines the functions of a telehandler, crane and work platform, making it a valuable asset for handling operations, while full 360° turret rotation means you can carry out various tasks without the need to move the machine.
The pentagonal cross-section allows for absolute precision when operating the boom, preserving lateral rigidity regardless of the amount of wear, which translates into greater safety for both you and your teams. Both powerful and precise, you will not be able to do without this versatile machine.
Lifting height: 29.5 m / 96'9"
Lifting capacity: 4999 kg / 10998 lb
Max reach: 25.8 m / 84'8"
Drawbar pull: 9500 dan / 21356.85 lbf
Overhang: 3.35 m / 11'0"
Moving speed: 40 kmh / 24.8 mph
For other benefits, application and features of this impressive machine click here to view brochure.
Harvest 2017 = DONE.19 SEP
Harvest 2017 has been a tough and frustrating season throughout Scotland due to the wet weather over the past months.
Thankfully for many the harvest is now finished and preparations for next season can get underway. This customer completed his harvest over a week ago thanks to his Case IH Axial-Flow 9240 Combine with a 35ft cut and 634HP.
For full specification of this impressive combine and the rest of the 240 series click here.
Machine of the Month - August 2017 - Ranger on Tracks21 AUG
Machine of the Month - Polaris Ranger Diesel 1000 & Tracks
This Polaris Ranger Diesel 1000 fitted with front and rear tracks, is our Machine of the Month. The unit has been customised for use on peat bog terrain.
The Polaris Ranger Diesel 1000 is now powered by a 1028cc Kohler 3 cylinder overhead cam liquid cooled engine. This proven, high performance diesel engine utilises indirect injection that delivers smooth power and reduced combustion noise. The Polaris Ranger Diesel Kohler engine has a compact, heavy-duty design with a cast iron crankcase for durability and an aluminium cylinder head for weight reduction. Full pressure lubrication provides superior protection and engine life. And, the new power plant is EPA/CARB Tier 4 compliant.
Engine Braking System (EBS) and Active Descent Control (ADC) work together to provide four wheel braking for optimum control and smooth, even deceleration during descents.
The Polaris Ranger Diesel has been designed with an ideal seat height combined with wide foot clearance for easy entry and exit. Plus, experience a full 10 inches of tilt steering adjustment, and room for three adults. It has the perfect balance of smooth riding, handling and turning radius from an ideal 81” (206 cm) wheelbase paired with 12” (30.5 cm) of ground clearance.
This machine truly is the toughest working, smoothest riding.
Machine of the Month - May 2017 - Manitou M26-422 MAY
The Manitou M26-4 is our Machine of the Month. The M 26-4 is a masted forklift truck designed to perform under the most extreme conditions. With 4-wheel drive, generous ground clearance and optimised dimensions, this machine remains stable and manoeuvrable regardless of the terrain. Additionally there is a wide range of tyres available to match your specific needs.
With its 75 hp engine, the M 26-4 is easy to maintain thanks to a fully opening bonnet for easy access to components. The masts are the result of Manitou's unquestionable expertise and are robust enough to lift up to 7 m in height.
Lifting height - 3.7 m
Lifting capacity - 2600 kg
Drawbar pull 6290 dan
Moving speed 21.6 kmh
Mast inclination (front/rear)(6° / 12°)
Shows Summer 201715 MAY
It's nearly that time of year when we get to see some familiar faces and meet some new ones as we exhibit a range of Manitou Telehandlers, Case IH Tractors, Polaris ATVs & Horsch Equipment at various local and national shows over the next few months.
To keep up with our whereabouts and where you can find us here's the all important list of shows and dates at which we're attending:
Saturday 27th May - Drymen Show
Thursday 8th June - Scotland's Beef Event, Earlston
Thursday 22nd - Sunday 25th June - Royal Highland Show
Saturday 1st July - Haddington Show
Saturday 8th July - Dalkeith Show
Saturday 22nd July - Biggar Show
Saturday 5th August - Berwickshire County Show
Saturday 12th August - Peebles Show
Machine of the Month - April 201727 APR
Machine of the Month - Polaris Ranger Crew
Tough. Reliable. Efficient. These are the backbone features of the Polaris RANGER® Crew. A reliable work partner and transport vehicle,the Diesel Crew can handle anything thrown its way, even with six passengers along for the ride.
Boasting a masterful 907 kg towing capacity, the Ranger Crew isn’t afraid to flex its muscles to get the job done. So go ahead, pack it all in, and enjoy having to take fewer trips between job sites.
Durability is what carries this powerhouse forward, which is why we engineered it to take a beating and keep on chugging. Wielding a compact, cast iron crankcase and aluminium cylinder head for weight reduction, the Diesel Crew is truly ready for anything.
The Diesel Crew is powered by a 1028cc 3-Cylinder overhead cam liquid cooled engine - a proven, high-performance diesel engine. Utilizing indirect injection that delivers smooth power and reduced combustion noise.
For full specification options, applications and accessories download the brochure here.
Manitou Finance Offer - Manitou Telescopic Handler24 APR
EXCLUSIVE LOW RATE OFFERS ON MANITOU MLT TELESCOPIC!
1+2 annual payments @ 0.95% flat rate p.a.
3+33 monthly payments @ 1.45% flat rate p.a.
For business users only. See full terms and conditions below*
All machines must have been customer delivered, invoiced and the finance deal concluded prior to 30 June 2017.
Based on a maximum balance to finance of £30,000. 1+2annual payments @ 0.95% flat rate p.a. 3+33 monthly payments @ 1.45% flat rate p.a.For more details contact your local Manitou Finance representative or call 0345 226 7382.
*Available in the United Kingdom for business purposes only, subject to acceptance and affordability checks. All equipment must have been customer delivered, invoiced and the finance deal concluded prior to 30 June 2017. Available on new equipment only. The finance product available under this promotion is hire purchase and finance lease. For hire purchase, full VAT is due on signing. An option-to-purchase fee (typically £100 including VAT) will be collected with the final payment. You will own the equipment when all payments have been made. For finance lease, VAT is due with each rental payment, return conditions apply and you will not own the equipment at the end of the agreement. Alternative finance products available, terms and conditions apply. An annual administration fee of £40 (plus VAT) applies, see agreement terms and conditions. A documentation fee (typically £100, VAT is applicable for a finance lease only) will be collected with the first rental. The offer is subject to a maximum balance to finance of £30,000. Images are for illustrative purposes only. Finance provided by Manitou Finance Limited, Northern Cross, Basingstoke, RG21 4HL. Registered in England No. 2308212. Authorised and regulated by the Financial Conduct Authority. For sales enquiries, please contact: 0345 226 7382
Take advantage of our latest budget-saving offers on all new Gehl equipment24 APR
For more details call 0345 226 7382.
For business users only. Fees apply, see terms and conditions overleaf. All machines must have been customer delivered, invoiced and the finance deal concluded prior to 30 June 2017. Based on a maximum balance to finance of £15,000. Alternative finance profiles available.
Terms & Conditions: Available in the United Kingdom for business purposes only, subject to acceptance and affordability checks. All equipment must have been customer delivered, invoiced and the finance deal concluded prior to 30 June 2017. Available on new equipment only. The finance product available under this promotion is hire purchase and finance lease. For hire purchase, full VAT is due on signing. An option-to-purchase fee (typically £100 including VAT) will be collected with the final payment. You will own the machine when all payments have been made. For finance lease, VAT is due with each rental payment, return conditions apply and you will not own the equipment at the end of the agreement. Alternative finance products available, terms and conditions apply. An annual administration fee of £40 (plus VAT) applies, see agreement terms and conditions. A documentation fee (typically £100, VAT is applicable for a finance lease only) will be collected with the first rental. The offer is subject to a maximum balance to finance of £15,000. Images are for illustrative purposes only. Finance provided by Manitou Finance Limited, Northern Cross, Basingstoke, RG21 4HL. Registered in England No. 2308212. Authorised and regulated by the Financial Conduct Authority
Machine of the Month - March 201720 MAR
The Machine of the Month is a Gehl 4240E Skid Loader.
The Gehl 4240E Skid Loader is built for efficiency and can adapt to a range of industries thanks to the variety of attachments. It's super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions. Other features include:
- A large operator’s compartment with clear front, side and rear sight lines provides operators full, expansive views for increased safety.
- Ergonomic controls in the 4240E Skid Loader provide smooth loader and attachment operation.
- Advanced, high-powered, naturally aspirated Yanmar engine with auto-shutdown systems and grid heater starter assists to aid in cold weather starting.
- Exceptional hydraulics of 16.5 gpm power a wide variety of attachments and produce outstanding attachment performance on the 4240E.
- A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their 4240E the most versatile machine on the job site. Popular attachments include augers, bale movers, brooms, grapples, mowers & more.
JOB VACANCY: SERVICE ENGINEER27 FEB
Job Title: Service Engineer/Technician
Reports to: Company Directors
Based at Dunbar Road, East Linton, East Lothian, EH40 3DE
Job Role: To maintain, repair and prepare a range of new and used products from primarily Manitou, Case IH, Polaris and Horsch. Initially the role will be workshop based but the successful candidate would be expected to carry out these tasks on customer’s sites.
Manufacture product training will be provided as required to ensure latest product skills.
- General machine preparation for new and used machines and attachments
- Diagnose and repair faults on machines
- Work well with colleagues as part of the Service and Workshop team
- Good customer service when attending mobile jobs on customer’s sites.
- Previous experience in similar role is desired
- Competitive rates of pay
- 28 days holiday
- Provided with company van
- Provided with mobile phone
For further information or to apply to this position email Ian Rose, email@example.com or call 01968 660777.
Machine of the Month - February 201724 FEB
The Machine of the Month is a customised Manitou TMT 25 S.
The Manitou TMT 25 S is a truck-mounted forklift which makes every inch of the logistics chain it's used on that much more manageable. It can be mounted to the rear of Lorries and can be ready for load handling tasks in less than a minute. It comes equipped with a telescopic boom which provides an efficient way of unloading from a single side and allows excellent manoeuvrability, even when dealing with areas with low ceilings.
The TMT 25 S is also fitted with outriggers for increased stability and performance traction. With a maximum lift height of 3.45 m, this practical and productivity-increasing forklift is a haulier's best friend.
Lifting Height – 3.42m – 11’3”
Lifting Capacity – 2500kg – 5500lb
Maximum Reach – 1.5m – 4’11”
Moving Speed – 11kmh – 6.8mph
NewAg from Manitou30 JAN
The Manitou group, global leader in all-terrain material handling, is launching a new range of forklift-trucks dedicated to agriculture, a sector in which it generates one-third of its sales. This new MLT (Manitou Loader Telescopic) range, named "NewAg", provides a response to the current and future requirements of farmers.
In order to best meet the current and future expectations of farmers, Manitou has been working for nearly 3 years on a complete range of machines and innovative services, including those related to connectivity and consumables. The range was launched earlier in the month at Lamma Show 2017.
"As requirements for comfort, performance and productivity are increasingly high on farms, we have to offer a choice of machines that are adapted to these constraints, and of course compliant with the Euro Stage IV engine standards. We have chosen to call this range NewAg because this name reflects the changes in the agricultural world and is understandable by everyone. The range fits perfectly within our REDUCE TCO* (TotalCost of Ownership) program, thanks to the numerous services offered, which can reduce the total cost of ownership still further", says Arnaud Boyer, Vice-President Marketing & Product Development for the Manitou group.
The visibility of the models in the NewAg range has been improved, with the redesign of the inclination of the blades on the roof grid by engineers. This roof grid, patented by Manitou, provides the user with a clear view of the load being handled, whatever the height of the deployed boom. Other elements have also been redesigned, such as the low position of the articulation point of the boom. Equipped with a panoramic monobloc windscreen, the NewAg's new cab provides a real 360° visibility.See and be seen. This motto is also one of the objectives of NewAg.
We currently have a NewAg model, the MLT635-130 PS+ in stock - see more details here.
Machine of the Month - January 201723 JAN
Case IH Luxxum
Some things make jobs so much easier that you wonder how you ever managed without them. The new Case IH Luxxum is just like that. With greater manoeuvrability, higher levels of comfort and better visibility than any tractor of this size that we’ve ever made, it continues our commitment to easing the demands placed on the operator, ensuring greater productivity from both tractor and driver.
Whether your farm jobs demand long hours in the tractor seat or require you to be in and out of your machine at regular intervals, you’ll find Luxxum tractors are designed to make your working day as stress-free as possible. That’s because they include the sort of comprehensive specification rarely found on other tractors of this size. These are machines that make light work of difficult tasks with the minimum of effort from both tractor and operator.
Top-of-the-range air suspension seating is standard, as is a passenger seat that provides comfortable accommodation yet folds away unobtrusively when not required, while comfort is further improved by front axle and cab suspension options. The instrument cluster moves with the steering wheel adjustment, and external vision is among the best in the business, with features including a curved upper windscreen area plus roof window that combine to provide excellent views when operating a front loader. Meanwhile, well-placed ventilation outlets ensure you keep cool in hot weather and warm when it’s not so good outside – and an ISOBUS connection allows the control of compatible implements.
Luxxum engines come from the only source you’d expect – our sister company FPT, a proven provider of power. Case IH and FPT engineers work closely to ensure each engine model used in a Case IH machine is perfectly matched to the demands it will face. That means you benefit from a tractor designed by teams from the same parent company working towards a common goal – your satisfaction. Every model uses a Stage IV, 3.4-litre, four-cylinder FPT engine with four valves/cylinder for thorough combustion. Intercooling and an improved turbocharger produce a maximum 99-117hp power (depending on model) at minimal fuel consumption. A steep torque rise translates into quick acceleration on the road and pulling power in the field that simply never gives up. Add in a wide constant power band that ensures peak performance in PTO applications and you have an engine that won’t let you down, no matter what’s asked of it. With Luxxum, there’s no diesel particulate filter, a reduction in exhaust gas recirculation by up to 10%, and an ultra-efficient selective catalytic reduction (HI-SCR) system, plus an improved turbocharger to give you the most efficient engine possible. Fuel tank capacities of 150 litres plus DEF/AdBlue tanks that hold 14 litres mean long stints between refuelling, while the engine oil change interval is an industry-leading 600 hours.
Case IH celebrates 175 years at the cutting edge of agricultural equipment production in 201716 JAN
Celebrating the past – Looking to the Future
In 1902, five companies merged to form the International Harvester Company in Chicago, the deal being brokered, personally, by J.P. Morgan, the American banker who dominated corporate finance and industrial consolidation at the time. The company produced its first combine harvester in 1915 and in 1923 introduced the Farmall®, the world’s first row-crop tractor. Providing greater productivity, reliability and safety, it was a revolutionary unified system of tractors and implements for ploughing, cultivating and harvesting. International Harvester sold more than five million Farmall tractors and in 1977 launched the unique single-rotor Axial-Flow® rotary combine, which revolutionized the farming industry with its simplicity, grain quality, grain savings, crop adaptability, matched capacity and high resale value. Axial-Flow combines still set the standard for harvesting performance today. Case IH was formed in 1985 when J. I. Case acquired the agricultural division of International Harvester, uniting the legacies of Case and IH in a single brand. Its first product, the Magnum tractor from 160hp to 240hp, was introduced in 1987 and became the first tractor to win the Industrial Design Excellence Award. Now producing up to 380hp, the Magnum continues to be one of the most recognizable Case IH products and more than 150,000 have been sold.
The revolutionary Quadtrac tractor, which was launched in 1996, established a new benchmark and remains unmatched. Now including the most powerful series production tractor in the world, the Steiger® Quadtrac 620 with up to 692hp, it delivers the greatest pulling power while implementing efficient, ground-conserving tillage and drilling concepts.
Since the turn of the Century, when Case IH reintroduced the Farmall brand, the company’s technical innovations have continued unabated.
- Case IH Advanced Farming Systems (AFS™), accurate to within 2.5cm, have been at the forefront of Precision Farming for more than two decades, giving farmers the ability to maximise productivity and profitability using satellite technology
- In 2000, Case IH launched continuously variable transmission technology which enables its CVX tractors to deliver an optimum combination of power and fuel efficiency
- Patented ‘Efficient Power’ engine technologies enable Case IH equipment to meet the latest Stage IV (Tier 4 Final) emission standards without complex exhaust gas recirculation systems or particulate filters
- In 2014, the Magnum 380 CVX was voted ‘Tractor of the Year 2015’ at the EIMA International Exhibition in Bologna, Italy. That year, Case IH also launched the Rowtrac CVX, which combines the individual benefits of tracked and wheeled tractors
- Case IH’s award-winning performance continued during 2015 when the new Optum CVX tractor was named ‘Machine of the Year 2016’ at Agritechnica. The judges were impressed by its stunning ‘power pack’ design, excellent power-to-weight ratios, maneuverability, efficiency and reliability.
- The Optum 300 CVX achieved the accolade of ‘Tractor of the Year 2017’ at the 2016 EIMA, the international farm machinery show in Italy, where the judges praised its high power, low-weight design which meets the needs of farmers in Europe. Their decision acknowledges Case IH’s ‘focus on farmers’ philosophy and Optum CVX’s importance in the growing high power/compact segment of the tractor market
- Visitors to the 2016 Farm Progress Show in the USA were stunned when Case IH unveiled the Autonomous Tractor Concept. Able to operate autonomously with a wide range of field implements, this ground-breaking concept is designed to make agriculture more efficient, economic and environmentally-friendly at a time when finding skilled labor is becoming increasingly difficult for farmers in many parts of the world.
“The Case IH 175th Anniversary is a testament to many years of quality, perseverance and progress. It’s also an occasion to reflect on our guiding principles of innovative engineering, efficient power and agronomic design, a philosophy that will continue into the future,” Andreas Klauser adds.
“I am certain that if Mr. Case could see the company today he would instantly recognise that the core values which he championed all those years ago are still at the heart of everything we do. I have no doubt he would approve of the fact that we involve customers in every new range, model and product update through our Customer Driven Product Design, but what he would think of the Autonomous Tractor Concept we can only guess!.
“When I look at the enormous transformation which has taken place in agriculture over the last 175 years, it is very exciting to think about what might be achieved during the next 175 years. I am sure that will be discussed during our celebrations with customers, dealers and employees.”
Machine of the Month - November 201628 NOV
Polaris Ranger 6x6
Unmatched for traction and capacity the Ranger 800 6x6 features on-demand six-wheel drive (6WD) and rear four-wheel drive (4WD), with a mid differential lock. This is a go anywhere UTV with masses of load space and power from the 760cc 4-stroke twin cylinder with Electronic Fuel Injection.
The Ranger 6x6 can carry massive loads with its Lock & Ride cargo system, box capacity of 567kg and a payload capacity of 907.2 kg. Not only that it has an immense 1-ton towing capacity meaning you can tackle the toughest jobs in total confidence.
There are endless accessories to make the 6x6 suited to all kinds of terrain and jobs. The model featured in the photo below is kitted out with a deer winch and LED lights - ideal for stalking in the Scottish mountains.
For full specification on this impressive go-anywhere machine click here to download brochure.
Case IH Optum 300 CVX takes Tractor of the Year title for 201710 NOV
The 2017 Tractor of the Year title has been awarded to Case IH for its Optum 300 CVX tractor, a result that acknowledges the marque’s focus on farmers’ commitment to soil care and fuel efficiency. Awarded by a judging panel from some of Europe’s most important agricultural journals, the accolade acknowledges the importance of the high power/compact Optum CVX tractor which fits in the growing customer segment
“Following the Machine of the Year 2016 award won by the Optum, this Tractor of the Year title shows the recognition across the European agricultural press that the Optum design and features represents a significant advancement in tractor technology,” says Dan Stuart, Case IH high-hp tractor product marketing manager for Europe, Middle East and Africa.
“Optum CVX is positioned between the US-built Magnum and of our Puma range, which like the Optum CVX is built in St Valentin, Austria. We have created a totally new, strong yet lighter weight design, with new strong front axle and structural engine oil sump design, to meet demands for customer requiring a 250-300hp tractor with a high power-to-weight ratio in a compact, manoeuvrable layout.”
“That means it’s well-suited to tasks where high power is essential but weight less so – such as working with large mowers, for example, where it’s important to protect the sward. But for jobs where traction and grip are the critical factor, such as heavy cultivations, Optum CVX can be weighted to make it as capable as any ordinary tractor of this power. And for road transport, the Optum can be ballasted according to the weight of the load it is pulling, for maximum safety and fuel efficiency.”
Driving through the continuously-variable Case IH CVX transmission, the Hi-eSCR equipped FPT 6.7-litre six-cylinder engine in the Optum CVX is built around a structural sump. While the tractor’s typical unladen weight is 11,000kg, this design allows for a maximum gross vehicle weight of 16,000kg. Further fuel-saving features include idle speed management, cutting engine speed from 850rpm to 650rpm if the tractor stands still without moving for two minutes.
“The result is a tractor that protects the soil, in that it can be operated at a weight that suits the work. It protects the owner’s business from the tyre and component wear that can occur when a heavy tractor is used for lighter field or transport tasks. And it protects against high fuel consumption, as proven by DLG Powermix test results of 249 g/kWh. The Tractor of the Year award shows how important those characteristics are considered to be in modern agriculture.”
Machine of the Month - October 201617 OCT
Manitou MLT 625
The MLT 625 is an incredibly compact machine. Specially designed for agricultural activities, it will prove to be an asset when tackling the daily tasks that need to be done on your farm. Its compact dimensions ensure unparalleled manoeuvrability for access to smaller buildings and tight spaces. The comfort of the driver's cab, sound insulation (up to 76 dB), full 360° visibility and JSM (Joystick Switch & Move) controls are just some of the features that make working days safer and less exhausting.
The Easy Connect System (ECS) makes swapping boom tip attachments easy and the sheer number available provides you with the versatility your farm requires. Hydraulic movements are precise and smooth and 4 driven and steered wheels combined with 3 steering modes optimise unit flexibility, regardless of the situation.
Save up to £500 off a new Polaris between now and the end of the year03 OCT
Polaris is offering substantial savings with autumn special offers on new Polaris Ranger utility vehicles and utility ATVs. From Monday 3rd October you can take advantage of a special discount of £500 off (€500 in Ireland) the Manufacturer's Suggested Retail Price of a new Polaris Ranger utility vehicle or you can have a discount of £250 off (€250 in Ireland) the MSRP of a new utility Polaris Sportsman ATV.
Polaris offers the widest choice of proven 4 x 4 utility vehicles and accessories so there will be a Polaris to suit any business users needs from farming to landscaping, local authorities to large estates, in fact anywhere that calls for rugged, dependable 4x4 off-roading.
In addition to these offers, members of the NFU, NFU Scotland and Ulster Farmers Union benefit from an additional 5% discount on selected new Polaris utility vehicles. Polaris is a world leader and European No.1 in 4x4 ATVs and utility vehicles, with an extensive range that is best viewed at an authorised Polaris dealer who will provide full details of the offers. Offers close on the 30th December 2016.
Machine of the Month - September 201619 SEP
Case IH Axial-Flow 240 series is our machines of the month...
Built for challenges associated with climate change, high-yielding crops and the need to become ever more efficient, Case IH Axial-Flow® combines are changing the landscape of harvesting technology yet again. With their increased power and enhanced threshing technology, the new Axial-Flow® models provide solutions for today’s and future challenges.
Case IH 240 series combines are built for the biggest farms, the largest contractors, the most demanding owners and operators, and the highest yields. They are developed and built for the lowest operating costs and utmost reliability – day after day, and season after season. At their heart is the proven Axial-Flow® single rotor technology, providing all the benefits associated with this concept such as thorough threshing, minimum losses and excellent grain quality due to the gentlest of grain handling.
Machine of the Month - August 201617 AUG
Polaris Sportsman 570
The Polaris Sportsman 570 is an impressive ATV with features including a powerful ProStar 44HP engine, industry-exclusive durable steel frame, Lock & Ride front and rear racks and has a payload capacity of 557 kg.
Hardest Working Features:
POWERFUL PROSTAR® 44 HP PERFORMANCE - Now with 22% more horsepower (44 hp) and featuring Electronic Fuel Injection (EFI) and Dual Overhead Cams with 4 valves per cylinder, the 570 starts flawlessly and runs smoothly.
ON-DEMAND TRUE ALL-WHEEL DRIVE (AWD) - Still the best automatic 4x4 system out there, the AWD engages all four tires when the rear wheels slip and you need more forward traction. Reverts back to 2WD when you don’t.
BUILT TO RUN ACCESSORIES - 40% more watts for more charging power and the capability to operate more hardest working Polaris accessories.
INCREASED FUEL CAPACITY - 13% more fuel capacity than its predecessor the Sportsman 500 H.O.
INTEGRATED FRONT STORAGE - The most integrated storage of any ATV. The 6.5 gallon capacity lets you stow-away loads of gear and still have access to it, even with items tied to the deck.
Smoothest Riding Features:
ERGONOMICS FOR YOUR COMFORT - Class-leading width at the thigh and feet provides all-day riding comfort and makes it easier to mount and dismount the ATV.
HIGH GROUND CLEARANCE - A full 11" of obstacle-clearing ground clearance lets you tackle some of the tougher terrain that comes your way.
LEGENDARY SMOOTH INDEPENDENT REAR SUSPENSION (IRS) - The Sportsman was the world’s first ATV with IRS, a feature that made it as popular as it is today. Its rock-solid design has 9.5" of travel to minimize body roll and keep the ride smooth.
Full spec of this compact yet powerful vehicle click here. We currently have a 2016 model in stock - if you would like any further information or to book it for a demonstration please call our office today on 01968 660777.
Machine of the Month - June 201629 JUN
Manitou MLT 634
One of our most popular telehandlers is our Machine of the Month, the Manitou MLT 634.
The MLT 634 is an extremely versatile telehandler designed for agricultural use. Capable of lifting loads of 3.4 tonnes to 6 m in height, this machine stands out due to the manoeuvrability offered by its wheelbase and sharp turning radius. Its 122 hp engine reaches a top speed of 35 km/h with optimum fuel economy.
The hydraulic variable pump ensures quick combined movements. The spacious and comfortable driver's cab has been designed for users who have to spend long periods of time behind the wheel, and includes all major comforts and useful operating information on board.
For full spec on this versatile machine click here to download brochure.
Royal Highland Show 201627 JUN
Thanks to everyone who came to see us at Ingliston over the weekend. The Royal Highland Show is one of our biggest shows of the year and it's always great to catch up with customers. All brochures of the machines we had displayed are available for download on the website - simply click on Franchises and select the make of interest.
Machine of the Month - May 201623 MAY
Case IH Round Baler RB455/465 Series Variable Chamber
Case IH have integrated a multitude of features into the new RB design so that every model is capable of following the largest combine or baling the heaviest crop with remarkable speed and efficiency. The bale size can be altered (from 90cm - 150cm/180cm) and monitored from the comfort of the tractor seat and the wrapping system is unbeatable – so there’s no need for you to worry about the crop type or conditions; you just follow the swath.
High Speed Pickup
Clean pick up of all crop types: choose from the standard 4-bar or heavy duty 5-bar pickup with heavy duty tines. The new double auger option with integrated feeding roll allows high capacity baling in large windrows.
Roto Cutter & Drop Floor Option
Work in comfort: choose from rotor feeder and rotor cutting versions. In the latter the 15 knives, protected from stones, can easily be replaced without using tools. The drop floor allows quick clearing of any foreign material without leaving the tractor seat.
Minimum crop losses: the endless belts keep a strong grip on the bales and with four belts losses of valuable crop are cut to a minimum.
Dual Density Option
High efficiency, high quality: the dual density option enables you to add extra weight to the bale, making this an industry leading high density baler. Fewer, heavier bales require less transport and storage, and promise higher silage quality.
Ground access: all service points can be easily reached thanks to wide opening doors that provide easy access. The baler is fitted with long life heavy duty chains which are lubricated each time the rear door is opened. Net rolls are easily changed from ground level.
Contact us today for more information or for a demonstration or click here to download the full brochure.
Machine of the Month - April 201618 APR
Manitou Man'Go 12
The Manitou MAN'GO 12 aerial work platform is a new concept in platforms, combining the benefits of both articulated and telescopic platforms. Originally designed for rental operators, it's also perfectly suited to professionals who need to get people up to 12m in height for construction applications as wells as industry professionals. Compact and suited for all-terrain, it can easily navigate congested work sites and tight storage spaces. Once collapsed, its small chassis allows for easy storage, and with simple controls and upkeep, it also gives you performance levels that will impress your operators.
Machine of the Month - March 201618 MAR
Case IH Optum 300 CVX
It may have won Machine of the Year awards but the all singing all dancing Case IH Optum 300 CVX is our Machine of the Month.
The Case IH Optum is powerful, compact and highly manoeuvrable with excellent power-to-weight-ratio. With it‘s stunning new design and eye catching signature lighting this tractor will handle any given task with maximum performance, efficiency and reliability.
For a tractor of this size, the efficient power it puts at your disposal is breathtakingly impressive. You can rely on the smooth, no-compromise delivery of power as the engine effortlessly lugs any primary tillage implement, and hauls large trailers economically and safely at up to 50 km/h on the road.
The front axle provides two damping cylinders with 110 mm travel and is saddle mounted to the engine sump. An adaptive control logic is used to ensure high performance, comfort and stability.
Efficient & Proven Engine
The new powerful 6.7 litre, 6-cylinder engine is designed to generate power and optimize fuel efficiency. Stage IV emissions standards are achieved with our proprietary high efficiency Hi-eSCR only after-treatment system.
Light & Powerful
The engine sump design is the backbone of the tractor. This lightweight design, minimizes weight to allow a 16,000 kg gross vehicle weight and an excellent payload of up to 5,500 kg. It allows the customer to add ballast when needed or use heavy front and rear implements.
With the Case IH Advanced Farming Systems (AFSTM), you can choose from a full range of guidance solutions, offering accuracy levels of up to 2.5 cm. The AFS Pro 700TM monitor, allows you to maintain control at all times – for example with the HMC II (Headland Management Control II) and it can maximize your efficiency, when operating ISOBUS Class III-compatible devices.
Machine of the Month - February 201623 FEB
Horsch Terrano MT
The Horsch Terrano MT has been specifically designed for "mixing on the top, loosening at the bottom!" and is our Machine of the Month.
It is particularly suitable for cultivating heavy soils that have to be loosened deeply, but where harvest residues can only be mixed-in in a shallow way to prevent rough soil from being transported to the surface. The 2-row DiscSystem allows for a shallow and intensively mixing cultivation and a clogging-free working eve if there are difficult residues and high quantities of straw.
We currently have a demonstrator model available, please get in touch for more information or to view full Horsch Range click here.
Polaris Demos Available, Spring 201617 FEB
Are you all set for Spring? Now is the time to make sure your equipment is in peak condition for the busy season ahead. We have a selection of Polaris models available for demonstration. For more information please call our West Linton depot on the number below or email Alan directly, firstname.lastname@example.org.
Horsch Demos Available08 FEB
Are you all ready for Spring? Now is the time to make sure your equipment is in peak condition for the busy season ahead. We have a Horsch Cultivator & Drill available for demonstration. For more information please call our East Linton depot on the number below or email Douglas directly, email@example.com.
Machine of the Month - January 201629 JAN
Manitou MI 25 D
Our first Machine of the Month of 2016 is the Manitou Industrial Forklift, the MI 25 D.
The MI 25 D forklift is designed to handle loads of up to 2.5 tonnes on solid travelling surfaces. The Yanmar diesel engine, the duplex mast as standard issue, the simple and robust design combine to ensure a quick return on investment, ease of upkeep and enhanced longevity.
The easily accessible driver's cab comes equipped with an adjustable steering column and ergonomic control panel. The innovative design behind this diesel front loader and the optimised placement of the counterweight allow for excellent visibility so everyone benefits in terms of safety. Thanks to the inching pedal and the limit switch braking, approaching loads is smooth and precise.
New Year; New Polaris!11 JAN
Take the power and performance of the Polaris ProStar engine delivering 31hp. Wrap around it the new Sportsman 450 H.O. and you have a full-size capability ATV at a 400cc class, entry-level price.
The Sportsman 450 H.O. is the new star of the Polaris Sportsman range, featuring Polaris’ legendary automatic 4x4 system with On-Demand, True All-Wheel Drive which engages all four wheels when you need more traction and reverts back to 2WD when you don’t. For a smoother ride there is the proven MacPherson Strut front suspension with 8.2in/20.8cm of travel and Independent Rear Suspension (IRS) with softer suspension springs for a better ride. Manoeuvring over obstacles is made easier with 10.5in/26.6cm of ground clearance and the Sportsman 450 H.O. benefits from a new style seat with more foam and a durable base to keep your ride more comfortable.
Storage is all-important with any hard working ATV and the new Polaris has a 180lbs/81.6 kg capacity rear steel rack and 90lbs/40.8kg front rack that is Lock & Ride compatible along with 1225lbs/557.7kg of towing capacity. The front storage capacity allows you to stow away loads of gear and still have access to it, even with items tied to the deck.
To run more electrical accessories the vehicle has a 660 watt output and comes with industry-exclusive integrated plough and winch mounts. For working in high dust areas a high-flow, high capacity air filter provides better dust filtration, while Electronic Fuel Injection provides flawless starting and smooth running in varied temperature and altitude. Braking is made easy with a single lever hydraulic disc system for all-wheel braking and a foot brake for rear wheel braking.
Also a key feature is the Polaris PVT Automatic Transmission which allows you to easily shift between High, Low, Neutral, Reverse and Park. The new Sportsman 450 H.O. comes in sage green and with its long list of features for 2016 is certainly a new star in the rising.
HAPPY NEW YEAR!01 JAN
Machine of the Month 2015 Selection20 DEC
And that's another year nearly over! What a year it has been - we've had a great selection of machines at both our depots over the year...here's a selection of our favourite 2015 Machine's of the Month! What will 2016 bring?!
Machine of the Month - November 201523 NOV
Case IH Puma 230 CVX
The Case IH Puma 230 CVX is our machine of the month. The Case IH Puma 230 CVX is highly productive, cost-effective, extremely comfortable and also intuitive and easy to operate. With a rated 228 HP and an impressive boosted maximum 269 HP this piece of kit will certainly find it easy to get most jobs done!
TRANSMISSION: continuously variable 50 KPH or 40 KPH Eco
BRAKES: Hydraulically operated multiple wet disk brake & trailer air brakes
TYRES: F 600/65 R28 R 650/65 R42
FEATURES: Electronic Hitch Control (EHC)
AgriScot 201510 NOV
On Wednesday 18th November we will be exhibiting at Ingliston at the UK's number one farm business event, AgriScot. We will be located in the the Lowland Machinery Hall which is the Country’s largest winter display of machinery where visitors will be able to view the latest developments in farm hardware and technology…from the latest tractors to equipment for both arable and livestock farms. We look forward seeing you there.
Machine of the Month - October 201521 OCT
Manitou MHT 790
The MHT 790 is our machine of the month. The Manitou MHT 790 high tonnage telehandler is specially designed for heavier, more cumbersome loads. It excels on uneven ground conditions thanks to its 4-wheel drive and steering, generous ground clearance, weight/power ratio and tractive force. Handle loads of up to 9 tonnes with a single hand with the JSM system on muddy or sandy ground with full 360° visibility.
The hydrostatic transmission and engine with controlled fuel consumption give you an effective mix of power and precision when using any of the various compatible attachments available. Easy to maintain, robust and with intuitive controls, this machine is sure to please both buyers and operators.
Maximum lift height: 6.84 m
Maximum lift capacity: 9,000 kg
Maximum outreach: 3.72 m
Tyres: 445/65 R22.5
Engine: John Deere Stage 3B
Power: 141 HP
Maximum torque: 534 Nm / 1500 rpm
Laden drawbar pull: 10905 daM
Get Ready for Winter...15 OCT
Get prepared for Winter and call our sales team today for more information - 01968 660777
New Improved Safety with Manitou Access Platforms06 OCT
Manitou has been listening to customer requirements and has extended the option of the Safe Man System to be available across the full range of Manitou Access Platforms (except Scissors & bi-energy models).
MAIN CUSTOMER BENEFIT:
The Safe MAN System is an anti entrapment safety system designed to protect the operator and minimise the risk of crushing, improving safety on site.
HOW IT WORKS:
A sensitive bar is fitted to the front of the control panel
The platform becomes inactive when the operator pushes on the bar
When activated an alarm sounds and blue light flashes
All movements will stop immediately
A rest button allows the operator to take control and disengage
SAFE MAN SYSTEM CAN BE FITTED TO THE FOLLOWING EXISTING UNITS:
80 / 100 VJR
120 / 150 / 170 AETJ
Machine of the Month - September 201521 SEP
Polaris Ranger Crew
Polaris's Ranger Crew cab is our Machine of the Month.
Ideal for moving people around: on the estate, shooting parties, sporting venues and for general farm work. The Polaris Ranger Crew offers economy coupled with the ability to carry six adults and their equipment. The long wheelbase combines with a fully adjustable suspension creates the smoothest of rides, even when loaded.
|ENGINE||570CC PETROL ENGINE|
|DRIVE TRAIN||ON-DEMAND TRUE AWD/2WD/VERSATRAC TURF MODE|
FRONT: DUAL A-ARM 9.6" (24.4CM) TRAVEL
REAR: DUAL A-ARM, IRS 9" (22.9CM) TRAVEL
GROUND CLEARANCE: 30.5CM
|TYRES & WHEELS||
FRONT: 26 X 9-12; PXT
REAR: 26 X 11-12; PXT
DRY WEIGHT: 764 KG
OVERALL VEHICLE SIZE: 386 X 152 X 193 CM
PAYLOAD CAPACITY: 793.8 KG
HITCH TOWING RATING: 907.2 KG
LOCK & RIDE CARGO SYSTEM
55W LOW/60W HIGH, LED TAIL LIGHTING
DIGITAL GAUGE, SPEEDOMETER, TACHOMETER, HOUR METER, GEAR INDICATOR, FUEL GAUGE, HI-TEMP, DC OUTLETSX3
New Tractor Range For Case IH08 SEP
Case IH announces the new Optum CVX range with a stunning new design, Powerful, compact and highly manoeuvrable with excellent power-to-weight-ratio, Efficiency, versatility and reliability.
More power and close to ‘Puma dimensions’ is what Case IH claims the European farming community have been asking for; this has now been achieved! The new Optum CVX is the first Case IH tractor to have the new design with a new bonnet and rear fender styling, plus eye catching signature lighting.
“Modern, productive farming and contracting businesses in Europe are amongst the most demanding customers worldwide, one reason being that cropping is more intensive and yields are higher than in most other regions, whilst weather conditions often limit available time windows for field work. Handling any given task with maximum performance, efficiency and reliability is therefore what the Optum CVX was designed and built for”, says Andreas Klauser, Case IH President.
Case IH Optum CVX
The Optum CVX range consists of two models with compact 6.7 litre NEF engines from FPT Industrial, with 270 or 300hp at a rated speed of 2,100rpm and a maximum power of 313hp at 1,800rpm for the larger of the two models. The engines feature Hi-eSCR only after-treatment solution for maximum combustion efficiency and fulfil Stage IV emission regulations. Changes for the engine include new valve material and design for the engine head for higher combustion pressure; however the major change comes in the lower part of the engine block and oil sump, with a specific design where the sump serves as backbone of the tractor, thus removing stress from the engine block. Whilst the typical weight of the Optum CVX amounts to 11,000kg, this ‘structural sump’ allows for a maximum gross vehicle weight of 16,000kg, providing ballast and payload options for the customer.The Optum CVX has the ability to put the additional power to the ground whilst maintaining the agility of the smaller models, thus further increasing efficiency, maximising uptime and increasing comfort levels for the operator, whilst reducing total cost of ownership: “This is an ‘Optumal’ solution for this broad range of demands and specifications. Our engineers have rethought and revised every single detail, always looking for ways to optimise efficiency, performance and reliability alike”, highlights Case IH Product Marketing Manager Dan Stuart.
“The single eVGT turbocharger delivers the high torque required at low engine speeds and responds faster than twin turbos, thus making the Optum a true ‘power pack’”, says Stuart. “In addition, owners and operators will enjoy the longest service intervals in this power sector and less time and money needs to be spent on routine maintenance. A massive reservoir of 630 litres diesel and 96 litres AdBlue tanks, and idle speed management which reduces the engine speed from 850 rpm to 650 rpm, further adds to the highly efficient operation of the Optum CVX as there is less need to spend time returning to the farmyard for refuelling”, he adds
Creating a tractor that offers our customer the best solution is one thing, but we also know that customers and operators like to be proud of the tractor they own and drive. The most striking thing for people when they see the Optum CVX for the first time is the stunning new design, including the new bonnet with dynamic lines and 3D LED lighting, plus signature lights, the tractor announces the new look for Case IH tractors of the future.
The Case IH Optum at a glance:
- Two models with 6.7 litre Stage IV FPT engine and 270 or 300hp at a rated speed of 2100 rpm
- Hi-eSCR only exhaust after-treatment
- Maximum gross vehicle weight of 16,000kg
- eVGT single turbocharger
- Longest service interval in the power sector
- 630 litres diesel tank and 96 litres AdBlue tank
- 4-range CVT with either 30m/h to 40km/h ECO or 30m/h to 50km/h ECO
- ABS/ABS Advanced and automatic park lock
- 4-speed rear PTO, 2-speed front PTO
- 165litres/min CCLS hydraulic pump as standard, 220litres/min available as option
- Rear linkage with 11,058kg maximum lifting power at ball ends
- Front linkage with 5,821kg maximum lifting power at ball ends
- ISOBUS Class II/III and RTK from the factory
- Headland Management Control (HMC II) and Remote File Transfer Function
- Optimum operator comfort and ease of operation
Machine of the Month - August 201524 AUG
Manitou TMT 25 S
Manitou's Truck Mounted Telehandler, TMT 25S, is our Machine of the Month.
It's boom brings you simplicity and speed to all your handling needs. Situated at the back of your lorry the TMT is always available and in less than one minute the truck us ready to load or unload all types of goods.
- Capacity 2500 kg
- Max lif height: 3450 mm
- 3 braked wheel
- Motor 4 cylinder 36,5 Kw
- Telescopic boom with lateral movement
For full details click here to download brochure.
Polaris & Browning UK Exclusive Ranger17 AUG
Polaris have developed a UK exclusive Ranger 570 (mid-size) Hell’s Canyon by Browning, the world-famous gun manufacturer, edition. The exclusive Ranger which was launched earlier this month and features:
- Lock & Ride Cab (tip-out screen, roof, rear panel and wiper kit)
- Gun Mount and 2 Scabbards
- SIXR 14” Flat black wheels & bighorn Tyres
- Browning Maxxus Camo Mossy Oak Infinity shotgun
- Browning Hell’s Canyon Pro Jacket
This exclusive model is available for order - for further details call us today on 01968 660777.
Machine of the Month - July 201515 JUL
Case IH Quadtrac 620
Machine of the Month July 2015
The award winning and one of the most powerful tractors in the market, the Case IH Quadtrac 620 sets new standards in comfort and operation, while the HI-eSCR emissions technology delivers massive power and fuel economy. They are the masters of productivity that large-scale farmers want in their fields.
For full details click here to download the brochure.
|Engine Type||Fiat Power Train Cursor 13|
|Number of cylinders||
|Emission Level||Stage IV|
|Rated Power||628 HP|
|Maximum Power||692 HP|
|Transmission Type||16/2 Powershift PS6|
|Hydraulic System Type||Variable displacement, pressure and flow compensating (PFC)|
|3-Point Hitch Max. Lift Capacity||8,949 KG|
|Drawbar Max. permissible vertical load||4,983 KG|
|Permissible total weight||25,401 KG|
New Website06 JUL
Welcome to our new and improved website...
This is the place to go for all our latest news, current stock, franchise information, model brochures and more.
Happy browsing folks!
Shows 201509 JUN
We have another show packed Summer this year...